EMP 3 firmware update revisions

(Update 01.03.2021)

EMP3-80-1031 Release Notes:

Special Notice: 

Once this firmware version is installed on the player, you will not be able to revert back to any previous official or public beta firmware. There will be no problem upgrading to any future official or beta firmware release.

Due to the extensive changes in this major firmware update, it is recommended that the user performs a "Reset Factory Defaults" operation after the firmware is installed. Please write down your special settings before doing this, and remember to re-apply your settings and adjust the proper volume level (if applicable) before you play any content. You may experience stability issues if this step is not performed.



• Added support for TIDAL Music Streaming. Requires use of OPPO MediaControl App v4.0 on your smartphone or tablet and will probably NOT work with EMP3.


• Improved subtitle support for user-created media.

• Improved support for user-created WAV files with non-standard metadata tags.

• Improved gapless playback for 176 / 88.2 kHz WAV files.

• Resolved an issue with smearing or ghosting effects in Netflix.

• Resolved a bass management issue where the subwoofer would clip when 0 dB signals were sent to all channels when one speaker was set to small.

• Resolved a frame rate conversion issue where 25 Hz and 50 Hz user-created media was converted to 60 Hz when TV System was set to Multi.

• Resolved an audio loss issue that could occur with MKV files with Dolby TrueHD and DTS-HD MA audio tracks. For proper bitstream output of a Dolby TrueHD sound track in MKV files, the sound track must contain the full Dolby TrueHD audio data, including both the MLP and AC3 parts. If the AC3 part has been stripped out, the MLP audio cannot be output as bitstream and will be decoded into LPCM. The resultant LPCM will retain the full quality of Dolby TrueHD.

• Added support for ARIB STD-B25 and ISDB fonts.

• Resolved an issue where some MP3 files bought from Amazon Music Store are skipped in the beta firmware 79-0711B.

• Resolved an issue where "Exiting" YouTube doesn't return to the Home menu.

• Removed the Picasa application from Home Menu.

• Fixed an issue where the RS-232 command #QPL responds with @QPL OK HOME when the player is in the following states: “NO DISC”, “LOADING”, “OPEN”, and “CLOSE”.

• General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples. Expanded the character set library to support more languages in external subtitles.

• Resolved a Color Space issue for the HDMI 1 Out in EMP3. Customers reported that if the Resolution was set to Source Direct and the Color Space was set to RGB Video Level, the actual color space sent out was RGB PC Level. This issue has been fixed in this firmware.

• Resolved a Picture Adjustment issue found on 75-0515 firmware. Customers reported that after changing the Picture Adjustment parameters for HDMI 1, the value of Contrast Enhancement would automatically go back to 0. It has been fixed in this firmware.

• Resolved a playback issue with regular DVD discs found on 75-0515 firmware. Customers reported that if the "DVD 24p Conversion" was set to "On", pressing the REV (rewind) button within the DVD playback could cause the player to immediately freeze up. This issue has been resolved in this firmware.

• Resolved a HDMI Audio issue with some 2L Blu-ray Music discs. Customers reported that if the AV Sync was set to 90ms and above, there might be no audio signal from both HDMI outputs.

• Modified the RS-232 serial control protocol: we eliminated the "#APP FFR" due to the removal of Film Fresh service, added the "#APP BER" to enable access to the Berlin Philharmoniker concert service, also fixed an issue with "#SZM" that could not change the Aspect Ratio.

• Added support for the “Pandora Premiers” station in Pandora.

• Improved the Gapless Playback feature, and resolved an issue where the gapless mode could not be enabled for some 96 kHz / 24-bit WAV files.

• Improved support for CUE files, specifically for CUE files that point to multiple WAV files.

• General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples. Expanded the character set library to support more languages in external subtitles.

 

______________________________________________________________

(Update 27.05.2014)

 

EMP3-75-0515 Release Notes:

 

This release is for the EMP-3 player. 

Special Notice: 

Once this firmware version is installed on the player, you will not be able to revert back to any previous official or public beta firmware. There will be no problem upgrading to any future official or beta firmware release.

Due to the extensive changes in this major firmware update, it is recommended that the user performs a "Reset Factory Defaults" operation after the firmware is installed. Please write down your special settings before doing this, and remember to re-apply your settings and adjust the proper volume level (if applicable) before you play any content. You may experience stability issues if this step is not performed.

 

 

Comparing to the current Official release version, the major changes included in this version are:

 

 Fixed a bug in calculating acoustic propagation delay from the "Speaker Distance" parameters of the "Speaker Configuration" setting.

 

 Upgraded the Netflix application to the latest version certified for EMP-3. This version features a brand new user interface. It also contains improved adaptive streaming technology which will improve streaming quality for high-speed internet connections. The new Netflix application should help customers who have reported poor streaming quality during peak hours. (On a related note, recently customers reported that Netflix streaming on EMP-3 players and other streaming devices could become unstable with error message like "not connect to internet". In our experience this issue is not caused by the player or its firmware update. It could be either a server-side problem or an Internet traffic problem. Should this happen to your device, please report the outage to Netflix. Netflix recommends a troubleshooting method of de-activating the device and re-activating it. De-activation can be done from the EMP-3 player’s setup menu (Setup -> Device Setup -> Netflix -> De-activate). Re-activation can be done by accessing the Netflix application from the Home Menu. In most cases, Netflix service can resume working after a few tries. The new Netflix application in this update contains additional network troubleshooting tool which can be used to test your connection to Netflix servers.)

 

 Added the "Digital Concert Hall" application from Berliner Philharmoniker, which provides live and recorded classical music concerts in HD video from leading orchestras all over the world. Removed the "Film Fresh" application which is no longer functional due to the service provider stopping the service.

 

 Improved Gapless Playback performance. Resolved issues such as the second track playing twice before moving to the third track, and resolved an issue where the Gracenote information could not be fetched when playing WAV files. (On a related note, there is a small chance in Gapless Playback mode that the second and successive FLAC or APE files become slightly chopped off before moving to the next track. It might be related to the "Compresssion Level" setting during the file encoding. 

 

• Resolved an issue where user settings (Size, Distance, Trim) inside the Speaker Configuration were incorrectly applied to the Headphone Out signal route. We revised the algorithm in this firmware and the Headphone Out signal is no longer affected by the Speaker Configuration changes.

 

• Added a safety feature for EMP-3: the "SACD Output" format is set to "PCM" by default. The reason is that the digital-to-analog converter (DAC) used on these two models cannot adjust the volume for DSD signals, so the analog volume level could automatically switch back to 100 when a DSD stream is detected. This safety feature will force the DSD stream to be decoded as a PCM stream before sending it to the DAC, which can help control the volume when loading SACD disc(s).

 

• Added support for the "4Kx2K@50/60Hz" resolution to the EMP-3 (HDMI 1 only, and in YCbCr 4:2:0 format only). The "4Kx2K Output" setting for the EMP-3 is set to "Auto 4K 50/60Hz 4:2:0" by default. Please note that once "4Kx2K@50/60Hz" is activated, the user choices of "Color Space (HDMI 1)" and "Deep Color (HDMI 1)" in "Setup Menu -> Video Setup -> HDMI Options" is not used.

 

• Resolved an issue of “Reset Factory Defaults” not erasing the user account for the Youtube Leanback application.

 

• Resolved an "A/V Sync" related issue where the A/V Sync data was not be automatically applied to the Coaxial and Optical digital audio outputs after the player was powered on.

 

• Improved the file sorting algorithm for the media center (the Music, Photo and Movie options on the Home Menu). The player can automatically detect numbers located at the beginning or end of the filenames and sort the files by the numeric value. Albums with numbered tracks will play in the proper order.

 

• Added the timing adjustment for external subtitles. This can be accessed from the "Option" menu -> "Subtitle Adj." -> "Sync." when playing movies from a USB flash drive or external hard drive.

 

• General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples.

 

All features and improvements of the previous firmware are also included in this version